Residents of multi-storey buildings often have to put up with the fact that the slab ceilings between floors are laid very poorly, which is why the ceiling is uneven. All their efforts to make it perfect with cement mortars or putties lead to nothing, since the vibration generated by the movement of people in the apartment located on the floor above leads to the gradual chipping of the plaster. Of course, wallpaper can solve this problem to some extent, but the best option is to install a plasterboard ceiling in the house. The ideality of its surface will no longer depend on the quality of the installation of floor slabs. And a two-level plasterboard ceiling in general can make a real attraction out of your apartment, as modern building technologies provide many different options for finishing the upper part of the premises using this material. But not everyone can afford to hire professional builders to carry out such transformations, so homeowners who are not afraid of the difficulties associated with home repairs roll up their sleeves and take on any, even unfamiliar, business.
Required Tools
Of course, only sheer enthusiasm is not enough to install a drywall ceiling, but some tools are also needed. For work you will need:
• level,
• roulette,
• pencil,
• chop cord,
• perforator,
• a hammer,
• screwdriver,
• construction knife,
• scissors for metal,
• grater for drywall.
The procedure for performing work when creating the first level of plasterboard ceiling
Drywall is a very fragile material, therefore, for its installation, a profile frame is constructed, which is attached with hangers or brackets to the draft ceiling. It will allow you to fix the drywall parts in the correct position, achieving their strict horizontality.
Three steps that include the installation of the profile frame of the first level
1. Markup execution. Using the level, you need to mark the points on the walls around the entire perimeter of the room at a height at which the lower plane of the profile structure will be located. According to the marks on each wall, it is necessary to beat off a continuous horizontal line using a chop cord (choke line).
2. Fixing the perimeter UD profile. A UD profile is nailed along the marked lines, but so that it does not cover the line, but it can be seen from below. For this work, you can use a puncher to drill holes, and expansion dowels for mounting the profile on the wall.
3. Installation of the crate from CD-profiles. Moving on to the next step, you need to cut pieces of the CD profile to fit the width of the room. After that, starting from the far wall, the blanks are inserted in turn inside the UD-profile installed on the walls on the left and right sides, forming transverse crossbars, the central longitudinal lines of which are at a distance of 60 cm from each other, and these frame parts are “backed” must look down. It is necessary to fix the CD-profiles from below with self-tapping screws using a screwdriver, screwing them to the perimeter profile. In order to prevent sagging of the future ceiling, it is necessary to pre-nail special brackets (“butterflies”) to the literal ceiling along each crossbar with two dowels, distributing them along the entire length in increments of 50-70 cm and screwing their “wings”, which are pre-bent down, with self-tapping screws to the sides of the profile, following its horizontalness with the help of a level.
Wiring distribution
Most people equip a suspended ceiling structure with various kinds of lighting fixtures, for example: LED strip, spotlights or original-looking chandeliers, as illumination decorating a plasterboard ceiling can create a special atmosphere in the room. But in view of the fact that the installation of lighting elements is carried out after the completion of finishing work in previously prepared places, the cabling must be carried out before plasterboarding is carried out. To do this, lay out the wires inside the profile frame, bringing their ends to the places where the lighting fixtures will be installed.
.
Installing drywall on the first level of the ceiling
When the wiring is in place, you can proceed with the installation of drywall parts. First of all, where possible, it is better to screw whole sheets, focusing on the marks for self-tapping screws indicated by the manufacturer. As a result, the whole sheet should be fixed along the entire length along the central longitudinal line and along the edges.
Those parts of the ceiling, where a whole drywall slab does not fit, are closed with parts cut from it to size.
If the workpiece has a non-standard shape and the location of the frame elements does not allow it to be securely fixed, then additional crossbars from the profile can be added in certain places so that there is something to screw the sagging parts of the drywall to.
It is important to set the rotation speed of the screwdriver chuck in such a way as to have time to stop, otherwise the self-tapping screw will go deep into the drywall by inertia, which can reduce the strength of the material to the frame. It is enough if the screw head is 0.5-1 mm deeper than the level of the sheet surface.
The sequence of actions for the construction of the second level of plasterboard ceiling
Usually, the installation of the second level of the plasterboard ceiling is carried out in order to decorate the upper part of the room. Often it is some kind of figure that stands out against the background of the first level surface, framed by a ceiling plinth or hidden lighting.
Installation of a profile frame for the second level
To install the second level, you must first draw its outlines on the drywall of the first level. Such marking will help determine the dimensions of the elements of the profile frame, which in this case is also necessary for the installation of plasterboard parts. In principle, the supporting profile structure of the second level can repeat the previous frame, only the first level serves as the base ceiling here, or rather, its profiles, to which the “butterflies” are screwed with self-tapping screws (and not nailed with dowels), designed to support CD-profiles of the second level. It is important to remember that drywall parts must be well fixed both around the perimeter of the figure and in its other parts, therefore, the elements of the profile structure must be installed in all necessary places so that this condition can be met.
The blanks of the frame parts are measured so that they do not protrude beyond the line of the drawing, and do not even reach it a little, so sometimes they can be cut not at a right angle, but in such a way as to repeat the bend of the line. Unlike the supporting frame of the first level, where the UD profile was installed only along the perimeter of the room, when constructing the profile structure of the second level, this element is also mounted along the marking line of the ceiling figure. To do this, its side parts are cut into many segments in order to be able to give the workpiece the necessary shape.
As the UD-profile is put on the end parts of the CD-profile located along the marking line and screwed to it from below with self-tapping screws, it gradually bends, repeating the contour of the picture.
Installing this part will allow you to fix the edges of curly plasterboard elements. As for the wall-mounted UD profile, depending on the design idea, there is not always a need to mount it around the entire perimeter of the room, but only in certain places. Sometimes there is no need for it at all if the shape being created does not border on a wall.
Installing drywall on the second level of the ceiling
It is also better to start the installation of drywall parts on the second level of the suspended ceiling by sheathing those parts of the frame where you can screw whole sheets, and then the remaining gaps are sewn up with cut-to-size pieces. Curly elements do not need to be cut out in advance, but it is better to first screw the workpiece to the frame and then cut it along the UD profile. Thus, the edges of the drywall will clearly follow the line of the drawing. Cut edges can be trimmed with a special drywall grater. The UD profile itself should also be closed with a plasterboard strip, which is cut to size and, if necessary, steamed so that it can be bent and screwed vertically to the profile without breaking it. Sometimes the strip width is calculated so that there is a gap along the drawing line between the first and second levels for installing a hidden backlight in the form of an LED strip. But for this, the frame of the second level must also be installed so as not to adjoin the drywall of the first level.
Finishing work and installation of illumination elements
Finishing both levels of the ceiling consists mainly in leveling their elements with putty. But how smooth the surface should be depends on whether the ceiling will be painted or wallpapered.
In any case, before applying putty, it is necessary to cover the joints of drywall parts with a special mixture, after covering these places with a primer layer and gluing a reinforcing mesh there. You should also cover up all the recesses in the drywall in places where it is twisted
self-tapping screws.
As mentioned above, the last step in the installation of this type of suspended ceiling is the installation of lighting equipment, for which holes are drilled in pre-designed places where the necessary electrical cables were previously connected. The power supply for the LED strip can be placed in the same space between the levels of drywall sheathing.
As you can see, the installation of a two-level plasterboard ceiling requires not only building skills, but also a certain talent and skill in the field of design, so you should really evaluate your capabilities and decide whether to take on this difficult task yourself or invite specialists to do it.
Thanks for sharing such a nice opinion, paragraph is nice,
thats why i have read it completely
It’s very simple to find out any matter on web as compared to books, as I
found this piece of writing at this website.
Excellent website you have here but I was curious about if you knew of any community forums that cover the same topics discussed in this article?
I’d really love to be a part of community where I can get responses from other experienced individuals that share the same interest.
If you have any suggestions, please let me know. Thank you!
Hello there! Do you know if they make any plugins to safeguard against hackers?
I’m kinda paranoid about losing everything I’ve worked hard on.
Any recommendations?
I was recommended this blog by my cousin. I’m not sure whether this post is written by him
as no one else know such detailed about my problem.
You’re amazing! Thanks!
I have read so many articles or reviews regarding the blogger lovers except this post is genuinely a
good piece of writing, keep it up.
Hi, i think that i saw you visited my weblog so i came to “return the favor”.I am
trying to find things to improve my site!I suppose its ok to use some of
your ideas!!
Thank you for any other excellent article. Where else may anybody get that kind of information in such a perfect approach of writing?
I have a presentation subsequent week, and I am at the search for such info.
I am regular visitor, how are you everybody?
This article posted at this web site is truly nice.
My developer is trying to persuade me to move to .net from PHP.
I have always disliked the idea because of the costs.
But he’s tryiong none the less. I’ve been using WordPress on several websites for about a year and am
worried about switching to another platform. I have heard very
good things about blogengine.net. Is there a way I can import all my
wordpress posts into it? Any help would be greatly appreciated!
Unquestionably imagine that that you stated. Your favorite justification seemed to be on the net
the simplest factor to bear in mind of. I say to
you, I certainly get irked at the same time as other folks think about concerns that they plainly don’t know about.
You managed to hit the nail upon the top and also outlined out the whole thing with no
need side-effects , folks can take a signal. Will likely be back to
get more. Thank you
Appreciate this post. Will try it out.
With havin so much written content do you ever run into any problems of plagorism or copyright infringement?
My site has a lot of completely unique content I’ve either written myself or outsourced but it appears a lot of it is popping it up
all over the web without my authorization. Do you know any solutions
to help stop content from being stolen? I’d truly appreciate it.
I am now not certain the place you are getting
your info, however great topic. I must spend some time finding out more or working out
more. Thanks for wonderful information I used to be in search of this information for my mission.
Wow that was strange. I just wrote an very long comment but after I clicked submit my comment didn’t appear.
Grrrr… well I’m not writing all that over again. Anyhow, just wanted to say superb blog!
I have read so many articles regarding the blogger lovers
however this article is really a good piece
of writing, keep it up.
Hey there! Do you know if they make any plugins to protect
against hackers? I’m kinda paranoid about losing everything I’ve worked
hard on. Any suggestions?
Excellent way of telling, and good piece of writing to obtain data on the topic of my presentation subject, which i am going to deliver in academy.
Hi there Dear, are you really visiting this site regularly, if so after
that you will absolutely obtain pleasant experience.
Hello, all the time i used to check blog posts here in the early hours in the dawn, as i love to find out more and more.
I do not even know how I finished up right here,
however I thought this submit used to be good.
I don’t know who you are but certainly you’re going to a well-known blogger in case you are not
already. Cheers!
Hello, Neat post. There’s a problem with your web site in internet explorer, might check this?
IE still is the market chief and a good element of other folks will leave out
your magnificent writing because of this problem.
Hi, i feel that i noticed you visited my weblog so i got here to return the want?.I’m trying to to find things to improve my web site!I suppose its adequate to
use some of your concepts!!
Excellent weblog right here! Additionally your website so
much up very fast! What host are you the use of?
Can I get your affiliate hyperlink for your host? I desire my site loaded
up as fast as yours lol
Hi there, I enjoy reading all of your post. I like to write a little comment to support you.
What i don’t understood is in fact how you’re now not really much more smartly-favored than you may be
now. You are so intelligent. You realize thus considerably in relation to
this matter, produced me individually imagine it from numerous various angles.
Its like women and men are not fascinated until it is something to
do with Girl gaga! Your individual stuffs outstanding.
At all times care for it up!
This design is steller! You most certainly know how
to keep a reader entertained. Between your wit and your
videos, I was almost moved to start my own blog (well,
almost…HaHa!) Excellent job. I really loved what you
had to say, and more than that, how you presented it.
Too cool!
Howdy I am so delighted I found your webpage, I really found you by mistake, while I was searching
on Bing for something else, Anyhow I am here now and would just like to say thanks a lot for
a fantastic post and a all round exciting blog (I
also love the theme/design), I don’t have time to read it all at
the minute but I have book-marked it and also added your RSS feeds, so when I have time I will be back
to read a lot more, Please do keep up the excellent b.
Hi, Neat post. There’s a problem along with your
web site in internet explorer, could test this? IE nonetheless is the
market leader and a big element of other folks will miss your magnificent writing because of this
problem.
These are really great ideas in about blogging.
You have touched some good factors here. Any way keep
up wrinting.
Hello Dear, are you in fact visiting this site daily, if so then you will without doubt get good know-how.
Can I simply just say what a comfort to uncover someone
that actually knows what they’re discussing on the net.
You certainly know how to bring an issue to light and make
it important. A lot more people need to read this and understand
this side of the story. I was surprised that you are
not more popular since you surely have the gift.
Hi! I know this is kinda off topic but I was wondering
which blog platform are you using for this site?
I’m getting fed up of WordPress because I’ve had issues
with hackers and I’m looking at options for another platform.
I would be awesome if you could point me in the direction of a good platform.
Ahaa, its good discussion on the topic of this post at this place at this webpage, I have
read all that, so at this time me also commenting at this place.
Heya i’m for the first time here. I came across this board and I find It really useful & it helped me
out a lot. I hope to give something back and help others like you helped me.
Thank you for the good writeup. It actually was once
a enjoyment account it. Glance advanced to more introduced
agreeable from you! However, how can we keep up a correspondence?
We’re a gaggle of volunteers and starting a
new scheme in our community. Your site provided us with valuable information to work on.
You have performed a formidable activity and our
entire neighborhood will be thankful to you.
Thank you for sharing your thoughts. I truly appreciate your efforts and
I will be waiting for your further write ups thank you once again.
Fastidious answers in return of this issue with firm arguments and telling
the whole thing on the topic of that.
Your way of describing all in this paragraph is genuinely nice, every one can effortlessly know it,
Thanks a lot.
When someone writes an paragraph he/she keeps the
image of a user in his/her brain that how a user can know it.
Thus that’s why this article is outstdanding. Thanks!
My spouse and I stumbled over here coming from a different web address
and thought I might check things out. I like what I see so i am just following you.
Look forward to exploring your web page again.
Hi there just wanted to give you a brief heads up and let you know a few of the pictures aren’t loading
correctly. I’m not sure why but I think its a linking issue.
I’ve tried it in two different web browsers and both show the same outcome.
Hello There. I found your blog using msn. This is an extremely well
written article. I will make sure to bookmark it
and return to read more of your useful information. Thanks for the post.
I’ll definitely comeback.
As I am preparing for my upcoming webinar on the story
of stainless steel, I can’t think about how far we’ve come
since Harry Brearley’s accidental discovery in 1913.
From simple cutlery to aerospace applications,
the development of this material is a testament to the human mind’s
ingenuity as well as the relentless search for innovation in the field of metalurgical technology.
My programmer is trying to convince me to move to
.net from PHP. I have always disliked the idea because of the costs.
But he’s tryiong none the less. I’ve been using Movable-type on a variety of websites for about a year and
am worried about switching to another platform.
I have heard excellent things about blogengine.net.
Is there a way I can import all my wordpress content into it?
Any kind of help would be greatly appreciated!
The information on tolerance control was particularly interesting.
How do you maintain consistent accuracy across different production runs of
hydraulic valves?
Here is my blog Cecila
The financial gains of Mantle’s 3D technology are evident, particularly in terms
of lowering material waste and production costs.
This could be a huge advantage for manufacturers.
The efficiency of Mantle’s 3D technology in cutting down on lead times from prototype to production could help manufacturers respond more quickly to market demands.
Current transducers are essential in accurate electrical measurements.
They ensure reliable readings across various applications.
I’ve found that choosing the right range for a current sensor is crucial to
getting accurate readings. What’s your method for your work?
My blog :: current sensors for complex systems
Excellent blog you have here.. It’s difficult to find good quality writing like yours nowadays.
I truly appreciate individuals like you! Take care!!
Наша бригада искусных исполнителей приготовлена предложить вам современные средства, которые не только гарантируют надежную покров от холодных воздействий, но и преподнесут вашему домашнему пространству оригинальный вид.
Мы работаем с современными материалами, обеспечивая долгосрочный продолжительность эксплуатации и превосходные результаты. Утепление облицовки – это не только экономия на отоплении, но и забота о экосистеме. Сберегательные технологии, которые мы применяем, способствуют не только личному, но и сохранению природных ресурсов.
Самое главное: Стоимость утепления дома снаружи цена у нас стартует всего от 1250 рублей за кв. м.! Это доступное решение, которое преобразит ваш домик в действительный теплый район с минимальными затратами.
Наши примеры – это не просто теплоизоляция, это постройка области, в где каждый член отражает ваш уникальный моду. Мы учтем все твои потребности, чтобы осуществить ваш дом еще еще более приятным и привлекательным.
Подробнее на веб-сайте компании
Не откладывайте дела о своем квартире на потом! Обращайтесь к специалистам, и мы сделаем ваш жилище не только более теплым, но и более элегантным. Заинтересовались? Подробнее о наших трудах вы можете узнать на веб-сайте. Добро пожаловать в мир уюта и качественного исполнения.
Thank you for your sharing. I am worried that I lack creative ideas. It is your article that makes me full of hope. Thank you. But, I have a question, can you help me?
Your point of view caught my eye and was very interesting. Thanks. I have a question for you.
Мы группа специалистов по продвижению в интернете, специализирующихся на увеличении трафика и повышении рейтинга вашего сайта в поисковых системах.
Мы преуспели в своей деятельности и готовы поделиться с вами нашими знаниями и опытом.
Какие преимущества вы получите:
• интернет продвижения по поиску
• Полный аудит вашего сайта и создание индивидуальной стратегии продвижения.
• Оптимизация контента и технических параметров вашего сайта для лучших результатов.
• Ежемесячный мониторинг и анализ данных для постоянного совершенствования вашего онлайн-присутствия.
Подробнее https://seo-prodvizhenie-ulyanovsk1.ru/
Клиенты, с которыми мы работаем, уже видят результаты: увеличение трафика, улучшение рейтинга в поисковых системах и, конечно, увеличение прибыли. Мы готовы предложить вам консультацию бесплатно, чтобы обсудить ваши потребности и помочь вам разработать стратегию продвижения, соответствующую вашим целям и бюджету.
Не упустите шанс улучшить свои показатели в онлайн-мире. Обратитесь к нам прямо сейчас.
Hi, Neat post. There is a problem together with your web
site in internet explorer, could check this? IE still is the marketplace chief and
a good component to other folks will omit your excellent writing because of this problem.
ลงทะเบียนและเข้าสู่ระบบและดาวน์โหลดลิงค์ fun88 ที่ไม่ถูกบล็อกล่าสุด ลิงค์เข้าถึง fun88 โดยตรงบนพีซี มือถือ แล็ปท็อป Macbook ไอแพด fun88 ถอนเงิน
лицензионные платформы для игр на деньги рейтинг казино bjpepaaltt